What do you need to know about applied current cathodic protection anodes?
An applied current cathodic protection type anode is a special type of anode used in cathodic protection systems to protect underwater sheet piles and pipe piles from corrosion. Although cathodic protection systems have been around for quite some time, it is only recently that cost-effective and efficient methods to combat corrosion have become available.
The ICCP anode functions through an external current cathodic protection method. This is accomplished by connecting the positive terminal of a power supply to the insoluble auxiliary anode and the negative terminal to the protected cathode to drive the cathode area.
Both the ICCP anode and the protected cathode are located in a consistent electrolyte, ensuring thorough and uniform contact with the electrolyte. This arrangement allows the surface of the protected cathode to gain access to free electrons and benefit from the shielding effect of cathodic protection.
How the applied current anode works
Applied current cathodic protection is a very effective method of fighting corrosion. The technique requires the application of a current from an external source, usually an applied current anode.
Cathodic protection occurs through an electrochemical process in which a direct current is applied to the ICCP anode, which subsequently releases electrons onto the metal surface to inhibit corrosion. This method can be very effective in protecting metals from corrosion, whether they are submerged or buried.
The applied current cathodic protection system works by connecting the ICCP anode and cathode to a direct current (DC) power supply, directly to the metal structure to be protected, with the cathode grounded. When the DC power supply is activated, a small amount of current flows through the anode and cathode, creating a potential difference between them. This potential difference triggers an electrochemical reaction at the anode of the applied current, resulting in the release of electrons into the metal. These electrons then interact with the metal surface to form a protective layer that prevents further corrosion.
Differences between ICCP Anodes and Sacrificial Anodes
When choosing between a sacrificial anode and an ICCP anode for a specific protection purpose, it is critical to evaluate each situation individually.
For buried pipelines, sacrificial anode cathodic protection is more economical and practical due to low stray current interference, high soil resistivity, and insufficient protection current.

Benefits and limitations of using applied current anodes
The main benefits of using ICCP anodes include:
Adjustable Output Voltage: The output voltage can be fine-tuned to protect large or non-corrosive structures that are relatively unaffected by soil resistivity.
Reduced anode dose and excavation effort: ICCP anodes require minimal anode dose and excavation effort.
Suitable for Large Structures: ICCP anodes are suitable for protecting a relatively wide range of equipment structures and provide cathodic protection for large storage tanks of all types.
Extended Area Protection: Installed ICCP systems can protect vast areas around pipelines.
Ideal for Uncoated Steel: The ICCP system delivers hundreds of amps of low voltage DC power, making it ideal for steel that lacks an effective coating.
Minimal Downtime: ICCP anodes require limited downtime for emergency repairs and can enhance the safety of the underlying infrastructure.
Easy to Monitor and Control: ICCP systems are easy to monitor and regulate and provide long-lasting corrosion resistance.
Limitations of applied current cathodic protection
While applied current cathodic protection has many advantages, it also has some disadvantages that should be considered:
External Power Dependency: ICCP systems require an external power source to operate, which can result in ongoing operating costs and the need for constant monitoring. System performance may be affected by power outages or power fluctuations.
System Location Limitations: The applied current anode system needs to be located more than 50 meters from the pipeline to prevent interference with its operation. This distance limitation can present challenges in densely populated areas or where space is limited, and can also lead to interference with neighboring metal structures, especially those in close proximity to the auxiliary anode.
Anode Bed Maintenance Challenges: Maintaining anode beds at optimal conditions can be difficult because the gas produced may not be discharged quickly enough. This slow discharge can lead to gas drag, which in turn increases the drag of the anode bed and can negatively impact its effectiveness and lifetime.
Stray Current Issues: ICCP anodes sometimes generate stray currents, which can inadvertently accelerate corrosion of nearby unprotected metal structures. If not managed properly, this can lead to unintentional damage to neighboring assets.
Environmental impact: The installation and operation of ICCP systems may have an impact on the environment, especially in sensitive environments. Careful planning and monitoring is required to minimize any potential negative consequences.
Complexity and expertise: Designing, installing and maintaining an applied current cathodic protection system requires specialized knowledge and expertise that can increase the cost of an effective management system for qualified personnel.
Despite these limitations, ICCP anodes remain a valuable and effective solution for corrosion protection in a variety of applications. By carefully considering these drawbacks and addressing them during the planning and implementation phases, the benefits of an applied current cathodic protection system can be maximized while reducing potential problems.
Types of ICCP Anodes Available
Xubo Titanium produces and processes a wide range of ICCP anode types, including tubular anodes, ribbon anodes, canister anodes, mesh anodes and rod anodes. Each type is designed to meet specific applications and environments, allowing customers to choose the most appropriate option based on needs and requirements.

ICCP MMO Tubular Anodes, also known as Mixed Metal Oxide Tubular Anodes, are titanium substrates coated with a layer of conductive and electrocatalytically active metal oxides. These anodes exhibit excellent versatility and are suitable for use in a variety of environments, including freshwater, saltwater, soil and seawater.
Advantage:
EFFECTIVE CORROSION PROTECTION: Provides effective corrosion shielding for protected structures.
Long service life and low maintenance: MMO tubular anodes have a long service life and require no maintenance throughout their
lifetime.
Versatility and adaptability: can meet the high protection current requirements of a wide range of structures and can be implemented in a variety of shapes and positions. They are also resistant to the environmental conditions of structural systems, ensuring reliable performance in different environments.
ICCP MMO Strip Anode
ICCP MMO strip anodes are particularly suitable for protecting the bottoms of underground storage tanks, reinforced concrete structures and other metal structures requiring corrosion protection. The outer wall of the tank floor can be effectively protected by applying an electric current.
These strip anodes are installed vertically underground at intervals of up to 305 meters. A grid-like pattern is formed by spot welding the intersections of the anodes to ensure consistent and thorough coverage. The composition of the oxide layer on the strip anodes can be customized to suit different environments such as seawater, freshwater and various soil conditions.

ICCP MMO Wire Anode
The MMO wire anode is an applied current cathodic protection anode used to prevent corrosion in a variety of environments. The anode is made of pure titanium wire coated with mixed metal oxides to provide excellent protection against corrosion. The low consumption rate of the precious metal oxide coating allows the anode to last between 15 and 50 years, depending on the operating current and application.
MMO wire anodes are available in three different diameters. The diameter of the anode wire affects the output of the anode, with thicker wire providing higher output.
One of the benefits of MMO wire anodes is their excellent performance in soil and seawater applications. Minimal wear and dissolution of the coating ensures long-lasting and reliable cathodic protection.






