A Low-cost Short-process Titanium And Titanium Alloy Residue Recovery Method

Western Superconducting Materials Technology Co., Ltd. invented a low-cost short-process titanium and titanium alloy residue recovery method, which specifically includes the following steps:
① After collecting the titanium and titanium alloy residues of the same brand and the same composition standard, they are shot blasted, pickled and dried for later use;
② Load the material into the copper crucible by stacking and gap filling;
③ Select an auxiliary electrode and a self-consumable electrode of the same brand, and use it as a cathode after butt welding, and use the material in the red copper crucible as an anode, load the furnace and evacuate for melting, let the melt fill the gap between the materials below, and fully wrap the materials below, get the ingot;

④ After the ingot is subjected to vacuum consumable arc melting (VAR) for 2 or more times, finished ingots of titanium and titanium alloys are obtained. The invention solves the problems of long recycling process and low utilization rate of titanium and titanium alloy residual materials, and at the same time reduces the risk of foreign matter and high-density inclusions, effectively controls the increase of impurity elements, and the obtained ingots are of reliable quality. The ingredients are evenly distributed.






