Gr7 Titanium Round Bar
Xubo stocks gr7 precision ground bars, which can be cut on one of our many precision saws to a tolerance of ±1 mm upon request. precision ground bars, also known as "machined bars", are stocked at Xubo in sizes ranging from φ 1 mm to φ 200 mm and are mainly made of titanium and palladium. When precision and accuracy are required, Xubo can provide grinding and cutting solutions to meet customer requirements.
Product Introduction
Gr7 Titanium Round Bar has high resistance to general corrosion, crevice corrosion, pitting, oxidation and abrasion/erosion resistance.
Ti-0.2Pd, Ti-0.15Pd and Ti-0.13Pd are available, among which Ti-0.2Pd is more widely used in reactors, towers, autoclaves, heat exchangers, pumps, valves, centrifuges, separators, pipes, pipe fittings and electrolytic tanks in various strong corrosive environments.
|
Product name |
Size(mm) |
Condition |
Garde |
standard |
|
titanium round bar
|
Φ（30-200）*≤3000 |
Forging Bar |
Grade7 UNS R52400 W.Nr 3.7235 |
ASTMB348 |
|
Φ（8-60）*≤3000 |
Rolled bar |
Main components
|
Ti |
Pd |
Fe |
O |
C |
N |
H |
|
Balance |
0.12≤Pd≤0.25 |
0.3max |
0.25max |
0.08max |
0.03max |
0.015max |
Physical properties: density 4.51g/cm3, grain size 6.0-7.0
The main mechanical property indexes are:
Room temperature mechanical properties
tensile strength Rm(σb):1000MPa, elongation:A5, 10% impact toughness:Αk20~30J/cm2
High-temperature mechanical properties (measured at 500 degrees Celsius): tensile strength: Rm(σb):700MPa, σ100:500MPa.
Production state: R,Y,M,ST
Manufactured in accordance with the highest industry standards, product Certificate are sent with the shipment.
Easy turning: easy turning, drilling, tapping, sharpening, welding, bending, circle, etc.
The company supplies titanium rods to support potion, spectrum, TUV, SGS, B, CNAS third-party testing.
Cutting machine cutting, deburring, plane chamfering.The exterior is clean and uncluttered.
our service
Shearing Plasma Cutting
Flame Cutting Waterjet Cutting
Band Saw Cutting Sawing
Forming Machining
Welding Drilling
Punching Heat Treating
customer feedback
why choose us:
1,More than ten years of market experience, qualified professionals.
2,Balance of timely delivery and cost effectiveness
3,Strict compliance with international standards
4,Long-term relationship orientation and customer referrals.
5,In stock Gr7 titanium round bar to meet even your small requirements
Hot Tags: gr7 titanium round bar, China gr7 titanium round bar manufacturers, suppliers, factory, Titanium Bar And Rod, Gr2 Titanium Bar, Gr7 Titanium Round Bar, Material titanium Alloy , 8mm Titanium Round Rod for Medical Use
You Might Also Like
Send Inquiry
