Gr2 Titanium Lap Joint Flange
The titanium flanges produced by Xubo are made of high-quality titanium and titanium alloy materials, and are produced in strict accordance with the standards. The flange is durable, strong in bearing capacity, high in reliability, corrosion-resistant and long in service life,
Product Introduction
The medium is not in direct contact with the Lap Joint Flange (Loose Flanger). The flange is known as a loose flange because it is not connected to the pipe directly.Gr2 Titanium Lap Joint Flange is a mobile flange that is often matched with drainage and water supply accessories. Each end of the expansion joint is connected with the project's equipment and pipeline via bolts when the factory is finished.
Specification for titanium Lap joint Flange
|
Material |
Gr1,Gr2,Gr5,Gr7,Gr9,Gr12 |
|
Standard |
ASME/ANSI B16.5,DIN2630~2633,BS etc |
|
Size |
1/2''~80''(DN10~600) |
|
Pressure rating |
0.6~32Mp |
|
|
(DIN) PN6,PN10 and PN16. PN25 through PN250 (ASNI) CL150,CL300,CL600,CL900,CL1500 |
|
Temperature of work |
-60°C~250°C |
|
Flange surface |
FF,RF,TG,RJ etc |
|
Quality Control |
Ultrasonic Testing & Material Test Report |
|
Packaging |
Plywood case lined with foam or as requested by clients |
Polished surface!
Polished surface, flat and burr-free, exquisite appearance
Fine workmanship!
Fine workmanship, solid structure, strong bearing capacity and long service time.
Process!
3 axis, 4 axis precision CNC processing, tolerance in strict accordance with the standard and customer requirements.
raw materials!
choose raw materials by heart, refuse to cut corners, quality assured
our service
Custom flanges
Material Testing（PMI）
Hands mark
customer feedback
Function of the titanium Lap joint Flange
Lap joint flang (loose flange), is used to save material. Its structure is split into two parts. The pipe part connects to the pipe at one side and the butt welding rings is at the other. To save materials, the flanges are made from low-grade materials while the parts of the pipe use the same materials.
Lap joint flange's advantages and disadvantages:
A:Advantage
1. Cost savings. Welding flanges from the same pipe material can be costly if it is expensive.
2. It can be difficult to weld, or it is too complicated to process. Plastic tubes, glass steel tubes, and the like.
3. It's convenient for construction. prevent flange bolt holes from changing in the future.
B:Disadvantages
1. Low pressure
2. The welding ring's strength is very low, especially if the thickness is below 3mm.
We specialize in the design, development, and manufacturing of metal pipe fittings.
Products include pipes, elbows and elbows of high, medium, and low pressure, as well as pipes, elbows and elbows, flanges and tees.
Towers, heat exchangers, and titanium storage tanks for non-ferrous metals. Materials include titanium (Ti), nickel, Monel, and zirconium.
The product specifications are based upon the standards GB, JB and SH, HG, American Standard ASME (ANSI), German Standard (DIN), Japanese Standard (JIS), industry advanced rules. We can design and develop special materials according to your requirements. These include extra-thick wall tees (non-standard), elbows, reducers or caps, giant flanges, and other fittings.
why choose us:
1, Xubo meet our customers' needs by providing high quality Gr2 Titanium Lap Joint Flange at competitive prices as planned and maintain long-term cooperative ties with our customers.
2,We use state-of-the-art machinery and high-end equipment to manufacture all our products. We are ISO certified and take every measure to maintain quality.
3,Not only do we have sizes and styles in stock, but we can also customize them according to customer requirements.
Hot Tags: gr2 titanium lap joint flange, China gr2 titanium lap joint flange manufacturers, suppliers, factory, Titanium Alloy Spacer Flange, Gr2 Titanium Lap Joint Flange, Titanium Flange
You Might Also Like
Send Inquiry
