5mm Titanium Round Bar grade 5 Stock

5mm Titanium Round Bar grade 5 Stock stock are new structural materials. Titanium has the characteristics of high melting point, low specific gravity, high specific strength, good toughness, fatigue resistance, acid and alkali corrosion resistance, low thermal conductivity, good high and low temperature tolerance, and low stress under rapid cooling and heating conditions. They are used in high-tech fields such as aviation and aerospace, and are continuously promoted to industries such as chemical industry, petroleum, electricity, seawater desalination, construction, and daily necessities.

Stock size：

φ1mm~φ350mm,010″Ø wire up to 14″ diameter

Grades:

CP Grade 1,CP Grade2,CP Grade3,CP Grade4,6Al-4V,6Al-4V Eli

Standard:

ASTM B348,ASTM F136,ASTM F67,AMS4928

Application:

Chemical processing,
Construction
Auto parts
Surgical implants
Medical devices

How to choose high quality titanium rod?

1. Due to the uneven surface of titanium caused by severe wear of the rolling groove, the appearance of inferior titanium bars often has pockmarks and pitting.

2. There are scratches on the surface of inferior titanium materials. The reason is that the equipment of inferior titanium manufacturers is simple, which is easy to produce burrs, scratching the appearance of titanium materials, and deep scratches will reduce the strength of titanium.

3. Inferior titanium bars are thin and low, and often show dissatisfaction with the appearance. The reason is that in order to achieve large negative public service, the pressure of the first few lines of the product is high, and the pressure of the titanium bar is low, and the filling cannot meet the requirements.

4. Inferior titanium bars are easy to fold. Creases are various creases formed on the surface of titanium rods. This defect often runs through the longitudinal direction of the product. The reason for folding is that the purchase rate of inferior manufacturers is low, the pressure of the drop is large, and the ears are folded. When folding, the product will crack after bending, and the strength of titanium is greatly reduced.

5. The appearance of inferior titanium bars is prone to scarring. The raw materials of inferior titanium bars are uneven and have many impurities. Simple titanium glue equipment is easy to scar after rolling.

6. The appearance of inferior materials is prone to cracks. The reason is that the blank is adobe, which has many pores. The adobe cracks during the cooling process due to the influence of thermal stress, and cracks appear after rolling.

7. The inferior titanium rod has no metallic luster and is light red or similar to the color of pig iron. There are two reasons. The blank is adobe. The unqualified material is not rolled at the standard temperature. The temperature of titanium is measured by visual inspection, which makes the conventional austenite area unable to be rolled and the function of titanium cannot be qualified.

8. The cross section of the inferior titanium rod is elliptical, and the pressure drop of the two lines before the roller is large. The strength of this titanium thread is greatly reduced, and it does not meet the external dimension specifications of the titanium thread.

Choose us for factory-direct 5mm Titanium Round Bar grade 5 Stock offering bright and high performance titanium rods. Enjoy competitive pricing, 24/7 technical support, and no hidden costs. Contact us at euros.yang@xuboti.com for quality assurance and tailored solutions.

Hot Tags: 5mm Titanium Round Bar grade 5 Stock, China 5mm Titanium Round Bar grade 5 Stock manufacturers, suppliers, factory, Platinized Titanium Anodes for Hard Chrome Plating, Dsa Titanium Anode Ru Ir Coated for Metal Electrowinning, grade 9 titanium, titanium electrodes, 4n Titanium Sputtering Target for Vacuum Coating, Electrode for Pool Salt Water Chlorinator