6mm Titanium Flat Bar Grade 2

We manufacture premium 6mm Titanium Flat bar Grade 2 in a variety of incremental sizes to meet your exact engineering specifications. Our titanium flat steel offers outstanding strength, corrosion resistance and durability to ensure optimum performance in a variety of industrial applications.

Difference:

The difference between titanium flat bars and titanium plates is that the width is less than 8 inches. The physical and chemical properties of the two are the same. Alloying elements such as aluminum and vanadium can improve mechanical properties, and we also offer pure commercial titanium for a variety of applications.

Processing:

Our laser cutting equipment, wire cutting equipment and water jet equipment can accurately cut titanium flat bars into the dimensions required by customers. Most of these titanium flat bars are used in motorsports, aerospace and automotive applications.

Size Range: Thickness 3mm up to 100mm

Standard: ASTM B265,ASTM F136,ASTM F67,AMS4928((Flat Bars cut from Titanium Plates))

Grade: CP titanium, Ti-6Al-4V, Ti-0.15Pd, Ti-3Al-2.5V, 6-2-4-2,6-2-4-6,6AL-4V ELI

Surface: Black, Pickling, Sand-blasting

tensile strengths: 30,000 psi to 200,000 psi (210-1380 MPa),

melting point: 3,135°F (1,725°C)

Surface quality inspection requirements:
1. The surface of the titanium flat bar should be smooth and metallic in color.
2. Slight darkening and local water marks are allowed on the surface of the titanium flat bar; local scratches, indentations, pits and other defects that do not exceed half of the thickness tolerance are allowed, but the minimum thickness should be guaranteed;
3. The surface of the titanium flat bar is not allowed to have macro defects such as cracks, peeling, oxide scale, folding, metal and non-metallic inclusions, and traces of over-alkali washing;
4. The titanium flat bar is allowed to remove local defects along the rolling direction, but the thickness of the titanium flat bar after removal shall not be less than the minimum allowable thickness;
5. When there are special requirements for the surface quality of the titanium flat bar, the supply can be negotiated by the supply and demand parties.

Application

Automotive use: Titanium weighs 45% of steel, which can help vehicles reduce weight and fuel consumption; improve power transmission and reduce noise; reduce vibration and reduce component load; improve vehicle durability and environmental protection.
Aerospace: Meet the requirements of high corrosion resistance and long life: Titanium materials have high fatigue life and excellent corrosion resistance, which can improve the corrosion resistance and life of the structure, and meet the requirements of high reliability and long life of advanced aircraft and engines.

Technical

Our experienced staff and resident metallurgists are always ready to provide technical assistance on any subject. Xubo titanium is unique in the field of multi-metal and plastic stock with an in-house CNAS accredited testing laboratory, highlighting our dedication to quality and complete service provision.For enquiries regarding 6mm Titanium Flat Bar Grade 2, our team can provide you with expert guidance and support.

Hot Tags: 6mm Titanium Flat Bar Grade 2, China 6mm Titanium Flat Bar Grade 2 manufacturers, suppliers, factory, Nickel Wire, Sintered Metal Filter, Titanium Plate And Sheet, Gr7 Titanium Sheet Plate Material, Striker Titanium Bars, Gr2 Titanium Lap Joint Flange