China Customized Titanium Plate and Sheet Manufacturers Suppliers Factory

Symbol: Ti

Melting point: 1,668 °C

Boiling point: 3,287 °C

Atomic mass: 47.867 u

Atomic number: 22

Electron configuration: [Ar] 3d²4s²

Density:4.5g/cm³

Titanium is the only metal that combines very high strength and light weight with excellent heat and corrosion resistance.
Titanium is the fourth most abundant metal on earth.
Titanium will not corrode when exposed to harsh weather, grease or most chemicals.
Titanium develops a natural blue luster over a short period of time, which actually enhances its resistance to rust.
The Boeing 747 contains 40,000 pounds of titanium.
Golfers purchased more than 1,500 pounds of titanium clubs this year.

Characteristics of titanium plate

1. Titanium seed plate is the surface of the oxide film is equivalent to a good wear-resistant hair separator, the use of titanium seed plate saves the separator, so that the pole plate is easy to peel, eliminating the process of pre-treatment of the seed plate, titanium seed plate is half as light as the copper seed plate.

2. The service life of titanium seed plate is more than 3 times than that of copper seed plate, and it can reach 10 to 20 years according to the operation conditions.

3. Electrolytic copper made from titanium seed plates has a dense crystalline organization, a flat and smooth surface, and excellent quality.

4. Since the titanium seed plate does not need to be coated with separating agent, the pollution of copper electrolyte can be avoided.

5. Increase the production capacity and reduce the production cost of copper electrolytic, so it has better economic benefits.

The most commonly used titanium plate grades

Grade1 titanium sheet

UNS R50250, W.Nr. 3.7025,

also known as Grade 1 Titanium, represents the softest and most ductile form of unalloyed titanium. With its low strength and high ductility, Grade 1 Titanium offers excellent weldability and cold formability. Moreover, it demonstrates remarkable impact resistance, making it suitable for various industrial applications. Notably, Grade 1 Titanium exhibits good resistance to mildly reducing conditions and strong oxidizing environments, whether with or without chlorides, further enhancing its versatility and reliability in demanding settings.

CHEMICAL COMPOSITION OF TITANIUM GR 1 SHEETS AND PLATES

C	Fe	H	N	O	Ti
0.1	0.2	0.015	0.03	0.18	≤99.6

MECHANICAL PROPERTIES OF TITANIUM GR 1 SHEETS AND PLATES

Grade	Tensile (ksi)	Yield Strength (ksi)	Elongation %
Titanium Gr 1	240	170	≥24

CP Grade 2 titanium sheet