Powered Titanium Water Heater Anode Rod
Xubo water heater internal tank anti-corrosion wire titanium anoderod has mature technology, simple installation, and long service life. It can be made to order and manufactured in large quantities as per customer drawings. It is safe and reliable and meets all environmental protection requirements. It can also be used to heat water. It can be used as an anode material to prevent corrosion of the water heater's inner walls. This will help to increase sales and attract customers.
Product Introduction
Xubo and many water heater manufacturers jointly produce titanium anode rods for anti-corrosion cathodic protection of water heaters, which have been tested in the market and used well, and during operation, there are no anode decomposition products and no pollution. Powered Titanium Water Heater Anode Rod can effectively prevent the corrosion of the hot period liner in the high hardness hot water when a very small voltage is input, and can make the cathode material surface precipitation of a layer of calcium layer, which enhances the protection effect. Anode long service life, can achieve the effect of lifelong maintenance-free replacement of water heaters, increasing the customer experience and product selling points.
|
Substrate |
Gr1 titanium |
|
Rod Diameter |
1mm、2mm、3mm、5mm or customize |
|
Rod Length |
50mm、110mm、120mm 、340mm or customize |
|
Threading |
3/4", G 3/4", or customize |
|
Coating area |
Customized |
|
Size |
20-100 Gallon Tank |
|
Coating type |
Ru oxide /Pt |
|
Current density |
50A/m² |
|
Temperature limit |
＜100℃ |
|
life extension |
Water heater tank life extension of 20 years |
|
Application |
water heater tank liner Corrosion Protection of Boiler Inner Walls |
Advantages：
permanently eliminates rotten egg smell from water!
power anode tod protects the inside of the tank from top to bottom!
extends water heater tank life by 20 years!
Use of water softener will not affect the life or protection!
Installation Instructions.
To accommodate this power anode, a 3/4" brass tee and a 3/4" plastic liner fitting that is long enough to extend beyond the thickness of the insulation is required.
Most gas heaters require a 3" or 6" long fitting.
may require a longer fitting and brass coupler to remove the insulation and complete the installation.
Plumber's tape, metal oxidizer and a screwdriver or hobby knife are required to remove the insulation.
Q:Are anode rods universal?
A:Yes, in most cases, anode rods for water heaters are universal.
Q:Where is the anode rod
A：
Q:Why replace anode rod on water heater
A:When the precious metal on the anode rod is exhausted, it cannot continue to generate current around it to absorb calcium and corrosive substances in the water, and the water tank will corrode and eventually explode.
our service:
Size and shape customization
Coating customization
Quality Testing
customer feedback:
why choose us
Xubo performs the highest quality work attainable in accordance with applicable codes, standards and customer specifications and prides itself on taking great care to achieve the highest quality Powered Titanium Water Heater Anode Rod attainable.
Hot Tags: powered titanium water heater anode rod, China powered titanium water heater anode rod manufacturers, suppliers, factory, Platinum Titanium Anode for Jewelry, Powered Titanium Water Heater Anode Rod, titanium mesh electrode, titanium electrode, Platinum Coated Titanium Electrode for Water Ionizer, titanium electrodes
You Might Also Like
Send Inquiry
